haisstronica 460PCS Heat Shrink Spade Connectors,AWG 22-10 Female and Male Wire Connectors,Quick Disconnect Spade terminlas

Great connectors for using when you want disconnect without having to cut the wires each time. I bought these to rewire a Co2 sensor that needs to replaced every five years. Next time I have to replace the sensor, I don’t have to cut wires (making them shorter), all I have to do is put the matching connector on the new sensor.

I cant tell you how much I've been using this product through out my rewiring project on my boat. The quality is exceptional. They are easy to use and provide a safe secure job well done.

great variety multiple sizes, good quality, great thickness of the connector, great seal and great for the money

They had fast shipping and you get a lot of them for the price. I have looked at regular auto parts store and they get like $5 for 2 of them..

Worked great foe my truck wiring projects.

These are a good value. You get plenty for the price. These aren't so cheap they fall apart and get all crumbly over time. Follow these pro-tips to get them on, staying nice:1. Don't twist the wire before you put it in the connector. You don't want a point sticking out at the end that won't get crimped because it will only crimp the widest spot and make the whole joint weaker. Make an even strip of the wire over a 1/4 but nor more than half an inch (5/16ths to 3/8ths is usually perfect). Make sure the wire is together and not all frayed and slip it into the butt connector and crimp. Whatever you do make sure there is no exposed wire outside the connector sleeve.2. Don't over crimp by going all ham on it and crushing the butt connector to oblivion. This will actually oblong the connector and might cause it to mushroom and cause a weak crimp.3. Once you get a good crip, heat these things up and they will shrink right into place and the glue that is in them will seal right up and you'll have a nice water tight connection. Use a heat-gun if you can rather than a lighter or a torch and make sure to move the wire over the heat-gun or the heat-gun over the wire, but don't let one point get too hot.4. If you must use a flame from a torch or a lighter, go slow, and move it around a lot. Hold the wire above the flame rotating the wire to get a nice even heat and shrink right into place. Do you best not to burn it because if you do, they get brittle and can leak or crack over time.Last Pro-Tip: When working in a cramped space, if you are using a flame from a torch or lighter or matches or whatever because you have no other choice, what I do is I wrap some quality aluminum foil around what I'm heating. In a confined space where the flame must get right up close to the wire where it will come in direct contact with the connector, the aluminum foil does a pretty good spreading out the heat AND it stops it from directly burning the connector or wire if you don't go nuts. This helps get the backside of the wire you might not be able to reach as well giving you a nice even seal without having to heat up one side way too hot.Enjoy!

Worked exactly as described! Especially liked the glue that’s inside the heat shrink tubing which adds a nice level of sealing to the finished connection!

Great assortment of quality connectors. Kit has plenty of every size you need.