⚡ Power up your projects with precision and protection!
The NOYITO 4-Channel Optocoupler Photoelectric Isolator Module is a compact, high-performance level voltage converter designed for seamless signal isolation and conversion between PNP/NPN and NPN signals at 24V to 3.3V. Featuring a 20kHz max frequency, anti-reverse protection, and LED indicators, it’s ideal for PLCs and microcontroller applications requiring reliable, noise-free communication.
| Brand | NOYITO |
| Maximum Supply Voltage | 24 Volts (DC) |
| Minimum Supply Voltage | 24 Volts (DC) |
| Number of Pins | 32 |
| Interface Type | Optical |
| Number of Channels | 4 |
| Material | Copper |
| UPC | 680613662613 |
| Manufacturer | NOYITO |
| Item Weight | 1.06 ounces |
| Product Dimensions | 3.39 x 1.89 x 0.59 inches |
| Item Dimensions LxWxH | 3.39 x 1.89 x 0.59 inches |
| Color | Green |
| Power Source | DC |
| ASIN | B07TCX59CG |
| Country of Origin | China |
| Date First Available | June 22, 2019 |
A**T
Works perfectly.
Needed to swap a PNP to an NPN for a CNC project. Worked right out of the box and was simple to wire. Created a little 3D printed case for it to keep it clean and make it easy to mount.
A**R
Good
Did exactly what it says it does. I used it to shift logic levels on my CNC router. Very pleased.
I**R
Perfect for Arduino and Geckodrive G540
Works great to switch higher voltage logic signals with an Arduino. I'm using this on a CNC plasma cutter with an Arduino based torch height controller and Geckodrive G540. The G540 is powered by 24VDC and it's inputs are 12V logic active low. This module (5V->24V) allows the Arduino outputs to control the G540 inputs, and also provides an additional layer of isolation between the high voltage plasma source and the PC running Mach3
D**K
Used to convert logic signals and gnd isolation.
These are available as NPN and PNP, and in 4 different voltages. I bought 5 to 24 and 24 to 5 volt models for a CNC router I am building. They work fine. Usually the NPN (active pull-down, resistive pull-up) will be what most applications would use. Lacks a detailed spec sheet though.
D**
User manual download link doesn't work
User manual download link doesn't work
M**R
Worked perfect for my DIY CNC Machine
Before adding this to my DIY Arduino based CNC machine I was having jobs constantly interrupted by noise on my limit switch inputs. Twisted shielded cables and capacitors helped, but the problem didn't go away until I added this between all my limit switches and the input pins on my CNC hardware. 4 channels is perfect for X, Y, Z and even the probe.
N**N
Works well for cnc limits, simple to hookup
easy mounting to din rail with plastic clips, worked well to isolate my proximity limit switches on my mini cnc
B**T
Works! But Inverting and Low Power (150mW)
This version inverts the output.If that's not what you're looking for, use this version, instead (make sure the description ends in "to PNP"):https://www.amazon.com/gp/product/B07TCWG4M5Pros:* fairly compact* 4 independent pairs of inputs/outputs.* easy to use - just supply your own output power sourceYour own power source must be supplied at the output (for whatever voltage you need the output signal to be).Cons:* Only 150 mW output (ED817 opto-isolator chip has an absolute maximum outout rating of 10mA)* Overly-bright LEDs. Larger resistor values would keep them from using so much power on the inputs and still allow them to light up.
Trustpilot
4 days ago
1 month ago
